KIP PrintPro - Manual (Page 70)

KIP Print Pro User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 63 -
Step Action Illustration
23. HP-RTL Raster Options –
Raster Density – Used to modify the
density level of the embedded
raster image. The scale range is
from 0-100. The higher the number
on the scale, the darker the image
will be. A density level can also
be keyed into the text field.
Photo Raster - Users have 3
choices of raster dither output
patterns. There is no ‘correct’
setting. Set according to user
preference.
24. Additional Parameters – Allows for
the addition of specific HPGL
switches to be used.
25. Pen Table – This section allows for
the manipulation of specific pens
if desired.
Pen Width by File – Uses the pen
table width provided within the file
as it was created.
Pen Color by File – Uses the pen
color provided within the file as it
was created.
Manual – Allows the user to
manually manipulate a specific
pen or pens by entering the values
for the Pen Number, Pen Width
and Pen Color.
26. Save – Select “Save” to save the
HPGL Preset or Save (active) to
save the HPGL Preset and make it
active as well or select Reset to
start over.