JLCooper ES-SloMoJ - Manual (Page 38)

38
Enable
Pressing this button enters the Gangway16 configuration mode. In
this mode, the Enable LED will illuminate and the VFD will show
the Gangway16 routing.
All On
When this button is pressed, the Gangway is configured to enable
all 16 ports.
All Off
When this button is pressed, the Gangway is configured to disable
all 16 ports.
Tally
Pressing this button allows you to select the port, which provides
Tally information (timecode, status) to the ES-SloMoJ. In this
mode, the Tally LED will illuminate and the VFD will show the
Gangway16 Tally routing.