JLCooper ES-SloMoJ - Manual (Page 20)

20
21. Mach 1 Control
Enables or disables the machine on port 1. This is intended for
units that have the ability to simultaneously record and
playback. This feature allows the operator to start the recorder
at the beginning of an event and then locking out the controls
to prevent the accidental stopping of the record process.
Disabled
Enabled
22. Gangway Oper. (v1.23 or later firmware)
Enables or disables control of an optional JLCooper
Electronics Gangway16 RS-422 router. Enabling this option
repurposes the 1, 2, 3 & 4 buttons and LEDs below the T-Bar
for remote control of the Gangway16. See the section on
Gangway Operation.