JLCooper ES-SloMoJ - Manual (Page 29)

29
6. Press the ENTER key. The Start and Stop times, along
with the SloMo speed will be saved to the currently
displayed storage location, then the Cue number will auto-
increment.
7. Repeat steps 3 thru 6. Each time, the Cue number will
increment to the next.
Playing back a Cue/Ply/Stop or CuePlyStp Slo Cue
1. Make sure in correct mode.
2. Enter the desired Cue number on the numeric keypad.
3. Press ENTER
4. Controlled unit will be directed to cue to the Start time
minus any preroll time. Once there, either a Play or a
SloMo command will be issued. The exact command sent
is the one set in the TBar Message Menu item. When the
unit has reached the prestored Stop point, a Stop command
is issued.
Editing the Cue List
It is possible to step thru the list of Cues and Enable or Disable
them individually for inclusion in the "Play all Clips" playback.
1. Set the W1 or W2 button for Toggle Clip Enable.
2. As you step thru the clips using the Next, Last, or
numerical input, the selected W1 or W2 button's LED will
light if a clip is enabled. Pressing the button toggles the
condition.
It is possible to change the SloMo speed that a CuePlyStp
Slo Clip plays back. This will take effect on individual
recalls of a Clip or on the Play all Clips" operation.