JLCooper ES-SloMoJ - Manual (Page 22)

22
When the ES-SloMoJ is in Cue and Park mode, the data format
conforms to the Ash Vale SM-2a protocol. When the ES-
SloMoJ is in Cue/Ply/Stop or CuePlyStopSloMo mode, the
data format is unique to the ES-SloMoJ.
Both formats are detailed in the appendix.
26. Rcv Cue Dump
Pressing the ENTER key causes the ES-SloMoJ to prepare
itself for reception of a Cue Dump from another ES-SloMoJ or
from a computer. Reception is via port #4. The ES-SloMoJ
will automatically detect which format is being sent to it.
Pressing the CLR/ESC button aborts this operation.
When sending data from a computer, a 25 mS delay must be
inserted between each cue to allow the unit to write to
nonvolatile memory. The ES-SloMoJ performs this when it
sends data.
27. Erase All Cues
In Cue and Park mode, pressing the ENTER key will set all
1000 cue locations to 00:00:00:00, which is considered an
erased location.
In Cue/Ply/Stop mode, pressing the ENTER key will set all
400 start and stop times to 00:00:00:00, which is considered an
erased location.
In CuePlyStopSlo mode, pressing the ENTER key will set all
400 start and stop times to 00:00:00:00 and set the speed to 00
00, which is considered an erased location.