JLCooper ES-SloMoJ - Manual (Page 18)

18
16. Show Shut Spd
Enables or disables display of the Shuttle speed in the display
window.
Disabled
Enabled
17. Log Operation
Enables or disables Log Operation.
(See Log Operation in appendix)
Disabled
Enabled
18. Cue Operation
This determines how cues are stored and played back and the
definition of a cue.
Cue and Park
Cues are only defined a start time. When a cue is
recalled, a CueUp message is sent to unit and no further
action is taken. Cue start times are captured using the
Store Cue button. This mode allows 1000 cues.
Cue/Ply/Stop
Cues are stored as start and stop times. When a cue is
recalled, a CueUp message is sent. When the unit
reports that it is cued, a Play command is issued. When
the play time agrees with the stop time, a Stop
command is issued. Cues are captured using the Mark
In/Out keys, along with the ENTER key. This mode
allows 400 cues composed of start and stop times.
CuePlyStopSlo
Intended primarily for Sports. Like the operation
above, except that when the cue is captured, the present
setting of the TBAR is saved as a SloMo setting. This
may be done without the TBAR actually affecting the
speed of playback at the time the capture takes place.
When a cue is recalled, this SloMo speed setting will be