JLCooper ES-SloMoJ - Manual (Page 13)

13
Parameters
1. Time Code Type
This is only used by the Step Frame (Frame+1 and Frame-1)
functions. This determines how the ES-SloMoJ behaves at
whole second boundaries.
24 29.97 drop
25 30 drop
29.97 60
30
2. Record Enable
Allows record and edit functions to be enabled or disabled.
Enabled
Disabled
3. TBar Range
This sets the speed range of the TBar from bottom to top.
Normal Scaling Disabled: Still to 10x
Scaling Enabled: Configurable
using TBar Speed Min and Max.
± 5%
95% to 105% of play speed
± 10% 90% to 110% of play speed
Bidirectional -1x to +1x play speed
4. TBar Mode
Passive
Movement of an Enabled TBar sets the speed, which
will be sent upon either pressing the Play button or
calling up a Clip or Cue. Actual command sent would
be selected by the "TBar Message" below unless set at
exactly Play speed, in which case a Play message will
be sent.
Active
Movement of the TBar immediately sends an
appropriate command to machine when Enable LED is
on.