JLCooper ES-SloMoJ - Manual (Page 28)

28
2. Press StoreCue. The display will show:
3. nter a 1, 2 or 3 digit number.
4. d, and the
display will revert. No Goto will be sent.
p” and “CuePlyStp Slo” Specific
Operations
Sav g
1. sure that in either Cue/Ply/Stop or CuePlyStp Slo mode.
2.
mber will show as
e leftmost three digits on the top line.
3.
ay take place with
nit playing at any speed or stopped.
4.
will light, and the current time will freeze
n the display.
5. ,
eed,
ne without affecting
e playback that may be going on.
E
Press Enter. The entered time will be store
“Cue/Ply/Sto
in a Cue with Start and Stop times
In
Select a starting Cue number by entering the number on the
keypad, then pressing CLR/ESC. The nu
th
At desired Start point, press Mark In. An asterisk appears
to the right of the cue number. This m
u
At desired Stop point, press Mark Out. Again, this may
take place with unit playing at any speed or stopped. The
Store Cue LED
o
If planning to have the automatic SloMo speed captured
you can at this point move the TBar to a desired sp
which will be displayed on the second line. If the
ENABLE LED is off, this may be do
th