JLCooper ES-SloMoJ - Manual (Page 37)

Gangway16 Controls
When Gangway Operation is enabled in the menu, the Machine
Control buttons and LEDs are repurposed to control the
Gangway16. In this case, the functions of the buttons and LEDs
are as follows:
Labeling
Since the default labeling of these four buttons is for the Machine
Control function, a plastic decal (shown below) is supplied with
the unit that allows the labeling of the buttons with the Gangway
functions. If desired, this decal can be applied the ES-SloMoJ
above the four Machine Control as shown above to clarify the
operation of these buttons and LEDs.
37