JLCooper ES-SloMoJ - Manual (Page 16)

16
Type 2
Sends a 2 byte track arm message with the A1 & A2 bits
copied from the D1 & D2 bits. Tally back uses byte 5 of
the Status Data message.
A1 = Analog Audio 1 and Digital Audio 1
A2 = Analog Audio 2 and Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
Type 3
Same as Type 2, except Tally back uses the Edit Preset
Sense message.
A1 = Analog Audio 1 and Digital Audio 1
A2 = Analog Audio 2 and Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
Type 4
Same as Type 2, except the A1 & A2 bits are set to zero.
A1 = Digital Audio 1
A2 = Digital Audio 2
Shift + A1 = Digital Audio 3
Shift + A2 = Digital Audio 4
12. Stop Method
Sets Stop behavior.
STOP Command
A Stop command is sent.
STILL Command
A Shuttle=0 (Still) command is sent.
2nd push STOP or STILL, STOP
The first push will cause a Still command to be sent.
The second push will cause a Stop to be sent.