Deutsch, Telio, Cs inlay telio – Ivoclar Vivadent Telio CS Inlay User Manual
Page 3: Cs onlay

Warning:
Unpolymerized material should not come in contact with
skin/mucous membrane or eyes. Unpolymerized Telio CS
Inlay / Telio CS Onlay may have a slight irritating effect and
may lead to a sensitization against methacrylates.
Commercial medical gloves do not provide protection
against the sensitizing effect of methacrylates.
Storage
– Do not use Telio CS Inlay / Telio CS Onlay after the indi-
cated date of expiration.
– Shelf life: see note on Cavifils, syringes or packages.
– Close syringes / Cavifils immediately after usage.
Exposure to light causes premature polymerization.
– Storage temperature: 2–28 °C / 36–82 °F.
Keep the material out of the reach of children.
For use in dentistry only.
Date information prepared:
07/2010; Rev. 0
Manufacturer
Ivoclar Vivadent AG,
FL-9494 Schaan/Liechtenstein
This material has been developed solely for use in dentistry. Processing should be
carried out strictly according to the Instructions for Use. Liability cannot be accept-
ed for damages resulting from failure to observe the Instructions or the stipulated
area of application. The user is responsible for testing the materials for their suit-
ability and use for any purpose not explicitly stated in the Instructions. Descriptions
and data constitute no warranty of attributes and are not binding.
Telio
®
CS Inlay
Telio
®
CS Onlay
Gebrauchsinformation
Beschreibung
Telio
®
CS Inlay und Telio
®
CS Onlay sind lichthärtende pro-
visorische Füllungsmaterialien. Die Einkomponentenmate-
rialien für die temporäre Versorgung werden ohne
zusätzlichen provisorischen Zement verwendet.
Beide Füllungsmaterialien sind in den Farben Transparent
(T) sowie Universal (Uni) erhältlich und sind in der Sprit-
zen- und Cavifil - Darreichungsform verfügbar.
Zusammensetzung:
Telio CS Inlay
Die Monomermatrix besteht aus mono- und difunktio-
nellen Methacrylaten (43.4 Gew.%). Die Füllstoffe
bestehen aus hochdispersem Siliziumdioxid und
Copolymer (55.5 Gew.%).
Zusätzlich enthalten sind Fluorid (1500 ppm), Katalysa-
toren, Stabilisatoren und Pigmente (0.6 Gew.%).
Telio CS Onlay
Die Monomermatrix besteht aus mono- und difunktio-
nellen Methacrylaten (36.3 Gew.%). Die Füllstoffe
bestehen aus hochdispersem Siliziumdioxid und
Copolymer (62.6 Gew.%).
Zusätzlich enthalten sind Fluorid (1500 ppm), Katalysa-
toren, Stabilisatoren und Pigmente (0.6 Gew.%).
Indikationen:
Telio CS Inlay
– Tiefe, parallelwandige Inlaypräparationen
– Verschluss von Implantatschrauben-Öffnungen
– Unterfütterungsmaterial für vorgefertigte, provisorische
Kronen und Brücken aus Polycarbonat oder Methacryla-
ten
Deutsch