Hoefer SP-2001 Vision Life Spectrophotometer User Manual
Page 9
Version 1.0
Page 9
THE APPLICATIONS FOLDER
1
Absorbance or %T (Transmission) at a single user defined
wavelength.
2
Concentration measurement at a single wavelength based on a
simple Factor entered or calculated from a single standard.
3
Wavelength scan between two user defined wavelengths. Range
200-950 nm, with user configurable peak finding function.
4
Absorbance versus time measurements either rate or end value
based.
5
Generation of calibration curve by measuring standards at a single
wavelength.
6
Absorbance or %T (Transmission) at up to 5 user defined
wavelengths.
7
Ratio of absorbance values at two user specified wavelengths.
SUMMARY:
Function Key
pad
number Description
OPTIONS
Within each application the user has the possibility to select various options that define the way results are
treated. If not using a stored method, it is advisable to check that these Options have been appropriately set
for your experiment when coming to the instrument. Note that setting the “History” parameter to on (see
Preferences later) will cause the instrument to store it’s last settings. If the “History” parameter is turned off, all
parameters and options will return to their default settings when you leave that application. (Unless it has
been saved as a method).