Hoefer SP-2001 Vision Life Spectrophotometer - Manual (Page 13)

Version 1.0
Page 13
Step 6 (if using standard mode)
Insert the reference. Press 0A/100% key. This will be used for all
subsequent samples until changed.
Press
to display the Run Standard screen.
Run the standard by pressing
OR
Press cancel
to return to the measure screen.
Step 7
Insert the sample and press
.
The concentration of the sample is displayed. Results shown as
---- indicate the concentration is out of range.
Repeat step 7 for all samples.
Press
to return to the Applications Folder.
Press ::; to display available Options which are described
below.
Options (select using key pad numbers)
1. Return to parameters screen (step 1 above).
2. Print result via selected method.
3. Toggles on/off, displaying a graph of wavescan +/- 20 nm
from selected wavelength.
4. Return to Run Standard screen.
7. Sample number – add a prefix to the sample number and
reset the incrementing number to the desired value.
8. Save method – use the left and right arrows to select a folder
to store in (Favorites/Methods 1-9), press the down arrow
and enter name.
9. Auto-print – toggles auto-print on/off.
Exit options by pressing
, or wait.