Harken 1093 Carbon Jib Reefing & Furling - Manual (Page 13)

COMMISSIONING
Tying Soft Attachment Lines
December 2001 2/2.5 Carbon Furler 13
4 Pass other end up and over crossing lines and then down
into loop, away from you.
5 At this point knot will not look anything like the finished
bend. Set knot by gently pulling on bitter ends and then
standing parts until it looks like Drawing 6.
3 Take end that is now
running down to right.
Tuck it down under
crossing lines
and up through
loop, towards
you.