Grandstream GVC3200 User Guide - Manual (Page 38)

Firmware Version 1.0.1.5 GVC3200 User Guide Page 37 of 97
802.1X MODE
Access GVC3200 home screen, go to Applications ->Settings ->Network->802.1X Mode. By default
802.1X is disabled. Selecting 802.1X mode to "EAP-MD5", "EAP-TLS5" or "EAP-PEAP" to turn on 802.1X.
Once enabled, the user will be required to enter the identity and Password to be authenticated in the
network.
Table 13 GVC3200 802.1X Mode Parameters
Parameters Descriptions
802.1x Mode
Allows the user to enable/disable 802.1X and configure 802.1X mode. The
default setting is disabled.
Identity Enter the Identity information for the 802.1X mode.
MD5 Password Enter the MD5 Password for the 802.1X mode.
CA Certificate Upload the CA certificate for the 802.1X mode.
Client Certificate Upload the CA certificate for the 802.1X mode.
Private Key Upload the private key for the 802.1X mode.