Grandstream GVC3200 User Guide - Manual (Page 26)

Firmware Version 1.0.1.5 GVC3200 User Guide Page 25 of 97
Upgrade Status
• Display "New Version" when a new firmware version is
detected.
• Display "Upgrading" in the process of upgrading.
• Display failure reason when upgrade fails. For example,
"Incompatible Hardware", "Insufficient Space", "Same
Version", etc.
Sleep Mode Display "Standby".
Abnormal Status
Display abnormal status information. The hexadecimal error code
will be displayed next to the abnormal status.
USING THE LED INDICATOR
The GVC3200 LED indicator is located next to the OLED. It can be used to notify the users with current
status of the device. Please refer to the status description below.
Table 8 GVC3200 LED Indicator Status Descriptions
LED Indicator Status Descriptions
Solid Green Booting or the device is already booted up
Flash Red Standby (Sleep Mode)
Solid Red Shut down but powered on (power adapter is connected)
Green Flashing once Key pressing on the remote control
OFF Power off
STATUS ICONS
The GVC3200 status icons are displayed on the right side of top status bar on the GVC3200 LCD display
device.
The following table lists the main status icons used on GVC3200.