Grandstream GVC3200 User Guide - Manual (Page 37)

Firmware Version 1.0.1.5 GVC3200 User Guide Page 36 of 97
DNS Server Input DNS server address.
Forwarding Routes Input Forwarding Routes. For example, 10.0.0.0/8.
VLAN SETTINGS
Access GVC3200 home screen, go to Applications->Settings->Network->VLAN to configure VLAN
settings on the GVC3200.
Table 11 GVC3200 VLAN Configuration Parameters
Parameters Descriptions
Layer 2 QoS
802.1q/VLAN Tag
Assigns the VLAN Tag of the Layer 2 QoS packets for LAN port. The default value is
0.
Note:
Please do not change the setting before understanding the VLAN's settings or
consulting the network administrator. Otherwise, the device might not be able to get
the correct IP address.
Layer 2 QoS
802.1p Priority
Assigns the priority value of the Layer 2 QoS packets. The default value is 0.
LLDP SETTINGS
Access GVC3200 home screen, go to Applications ->Settings ->Network->LLDP to configure LLDP
settings on the GVC3200.
Table 12 GVC3200 LLDP Configuration Parameters
Parameters Descriptions
LLDP Enable or disable LLDP. The default setting is disabled.
Layer 3 QoS for
SIP This field defines the layer 3 QoS parameter for SIP packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48.
Layer 3 QoS for
Audio This field defines the layer 3 QoS parameter for audio packets. It is the value used
for IP Precedence, Diff-Serv or MPLS. The Default value is 48.
Layer 3 QoS for
Video This field defines the layer 3 QoS parameter for video packets. It is the value
used for IP Precedence, Diff-Serv or MPLS. The Default value is 48;