Grandstream GVC3200 User Guide - Manual (Page 23)

Firmware Version 1.0.1.5 GVC3200 User Guide Page 22 of 97
Presentation
 Enable/disable presentation function to send presentation
to all members in the conference.
 Enable/disable presentation function to show presentation
on displayer device which is connected to HDMI output 1
as projection when the GVC is in standby mode.
Send/Answer/Add
Party Into Conference
 Access the dial screen by default when GVC is in idle
mode.
 Enter phone number and press the key to dial out.
 Access the invite screen to add members in a conference.
 Press the key to bring out the backstage conference.
End Call/Remove Party
From Conference
 Delete members in conference.
 Hang up the conference.
Backspace Press the key to delete input characters.
Navigation Keys:
Up/Down/Left/Right
 Adjust cursor movement.
 Control PTZ movement in camera mode.
OK
 Confirm operations.
 Bring up the soft keypad when the cursor is in an input
box.
Power On/Off
LCD prompt shows the following three options upon pressing
this key:

Put the GXV3200 into sleep mode.
 Power Off.
 Reboot.
*/Record
 Input * in input field.
 Used as "." when dialing direct IP call.
e.g., 192.168.40.5.
 Start/stop recording in camera control mode.
 Start/stop recording in a call.