Grandstream GVC3200 User Guide - Manual (Page 32)

Firmware Version 1.0.1.5 GVC3200 User Guide Page 31 of 97
TURNING BLUETOOTH ON OR OFF
1. On the LCD display device, go to Settings->Network->Bluetooth.
2. Tap on the green switch next to the GVC3200 device on the top row to turn on/off Bluetooth. Please
note the Bluetooth needs to be turned on in order to use the remote control.
PAIRING GXV3200 WITH A BLUETOOTH DEVICE
Before connecting GVC3200 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
1. On the LCD display device, go to Settings->Network->Bluetooth.
2. Press button on the remote control and select "Search for devices".
3. The GVC3200 scans and displays the IDs of all available Bluetooth devices in range. Once the
Bluetooth device shows up in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or if passcode is required, please refer to the
device's documentation or other procedures to obtain the passcode.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The external speaker provided with the GVC3200 is not pre-paired to the GVC3200. If the user would like
to use external speaker via Bluetooth connection with the GVC3200, the user must pair and connect it to
GVC3200 via manually before using it for audio output.
--------------------------------------------------------------------------------------------------------------------------------------------
CONNECTING TO A BLUETOOTH DEVICE
After successfully paired, the device will be connected to the GVC3200 immediately. Users will see this
device listed under "Paired Devices". Tap on next to the connected device. Users will see options
"Rename", "Unpair" and etc.