Gasboy Fuel Point Ground Antenna - Manual (Page 19)

MDE-4530 Fuel Point Ground Antenna Installation Instructions · November 2005 Page 15
C07364 Surface Mount Antenna Installation Installation
C07364 Surface Mount Antenna Installation
The Fuel Point antenna can be surface mounted at indoor or covered sites or where weather
conditions permit.
1 Locate the antenna housing with the nozzle and mark pavement and housing outline on the
side of the island.
2 Drill a ½ inch diameter hole (within the housing outline and not more than 1-1/2 inch above
pavement) into the base of the pump.
3 Attach the C07362 antenna in the recess on the bottom of housing. Attach cable using butt
connectors supplied and route and clamp cable in machined slot.
Figure 3-6 Installing a Surface Mount Antenna
4 Attach metal wire chamber bracket to the island end of the housing using the self threading
screws supplied.
5 Slide housing bracket against island. Drill all mounting holes. Install threaded inserts and
attach housing to ground.