beautypg.com

Gasboy VT 520 User Manual

Page 13

background image

MDE-4974A Boundless® VT 520 Terminal and Okidata® Printer Setup for Gasboy® Fuel Management Systems · October 2012

Page 13

VT 520 Terminal Setup

12

If you have a Series 1000 software earlier to version 8.1, FleetKey software earlier to version
2.1, or “A” System software, use the arrow keys to highlight the Communication and Printer
options listed below and set the following parameter values:

Communication X Transmit speed parameter = 1200
Communication X Transmit flow control parameter = NONE
Communication X Receive flow control parameter = NONE
Printer X Serial print speed parameter = 9600
Printer X Transmit flow control parameter = NONE
Printer X Receive flow control parameter = NONE

For “A” Systems, set the following parameter values:

Communication X Word size parameter = 7
Communication X Parity parameter = Even
Communication X Stop Bits parameter = 2

13

Use the arrow keys to highlight the Save settings option and press ENTER to save the
terminal settings (see

Figure 10

).

Figure 10: Save Settings Option

14

Press CAPS LOCK and PRINT SCREEN simultaneously or highlight the Exit Set-Up
option and then press ENTER to exit SET-UP mode.