Gasboy VT 520 - Manual

MDE-4974A Boundless® VT 520 Terminal and Okidata® Printer Setup for Gasboy® Fuel Management Systems · October 2012 Page 1
Introduction
Purpose
This document describes the setup parameters for the Boundless ® VT 520 terminal and printer
switch settings for the Okidata ® 184/186 printer, when connected to one of the following
Gasboy ® Fuel Management Systems:
• Series 1000
• Series 900 TopKAT
™
• CFN ® Series
• “A” Systems
This document is not intended to be a complete reference for the Boundless terminal. The
latest Parameter screens are shown in this document. However, interim software changes by
Boundless may result in minor variations. For any clarifications, refer to documentation
section of the Boundless website (
http://www.boundless.com ).
Table of Contents
Topic Page
Introduction 1
Important Safety Information 2
VT 520 Terminal Setup 4
Okidata 184/186 Printer Setup 14
Related Documents
Gasboy Documentation
Document
Number
Title GOLD Library
C01665 CFN Series SCII & Islander ™ II Start-Up Manual Gasboy Fuel Management Products
C01918 CFN Series SCII Installation Manual Gasboy Fuel Management Products
C08921 Series 1000 FMS Startup Manual Gasboy Fuel Management Products
C35587 Gasboy CFN Islander I & II Installation Quotation Guide Gasboy Fuel Management Products
C35963 CFN Islander II Installation Manual Gasboy Fuel Management Products
MDE-4319 TopKAT Fuel Management System Installation Manual Gasboy Fuel Management Products
MDE-4344 Series 1000 Fuel Management System Installation Manual Gasboy Fuel Management Products
Other Documentation
Document
Number
Title Where to find
598-0013029 VGB10/VGB11 Video Terminal
Installation and Operating Information http://www.boundless.com/Documentation/598-0013029.pdf
MDE-4974A
Boundless ® VT 520 Terminal and Okidata ® Printer Setup for
Gasboy ® Fuel Management Systems
October 2012