Gasboy Dorio 10 User Manual
Introduction, Purpose of document, Related documentation
MDE-4611 Dorio 10 Terminal/Okidata® Printer Setup Instructions • October 2006
Page 1
Introduction
Purpose of Document
This document describes the Setup parameters for the Boundless
®
Dorio 10 terminal and the
printer switch settings for the Okidata
®
Microline
®
184/186 printer when connected to one of
the following Gasboy Fuel Management Systems:
• Series 1000
• Series 900 TopKAT
• CFN
• “A” System
This document is not intended to be a complete reference for the Boundless terminal. The
parameter screens shown are as current as possible; however, interim software changes by
Boundless may result in minor variations. Review the documentation section of the Boundless
website (
) for any updates and clarifications.
Refer to the appropriate installation manual for the fuel management system being used for
cabling information, etc.
Related Documentation
Gasboy Documentation
Other Documentation
Document
Number
Title
GOLD Library
C01665
CFN Series Site Controller II & Islander II Start-Up Manual
Gasboy Fuel Management Products
C01918
Gasboy CFN Series Site Controller II Installation Manual
Gasboy Fuel Management Products
C08921
Series 1000 Fuel Management System Start-Up Manual
Gasboy Fuel Management Products
C35587
CFN Islander I & II Installation Quotation Guide
Gasboy Fuel Management Products
C35963
Gasboy CFN Series Islander II Installation Manual
Gasboy Fuel Management Products
MDE-4319
TopKAT Fuel Management System Installation Manual
Gasboy Fuel Management Products
MDE-4344
Series 1000 Fuel Management System Installation Manual
Gasboy Fuel Management Products
Document
Number
Title
Where to find
598-0013029
VGB10/VGB11 Video Terminal
Installation and Operating Information
MDE-4611
Dorio 10 Terminal/Okidata
®
Printer Setup
Instructions
October 2006