Gasboy 9820 - Manual

MDE-4864 Gasboy® 9820 Pump Interface Kit Installation Instructions · October 2009 Page 1
Introduction
Purpose
This document provides installation instructions for the Gasboy ® 9820 Pump Interface Kit.
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Installation of the Gasboy 9820 Pump Interface Kit 5
Pulse-out I/F Board (M06587A001) Jumper Settings 8
Required Tools
The following tools are required for the installation of the kit.
• Standard Screwdriver
• Phillips
® Screwdriver
Parts List
The following table lists the parts included in this kit.
Sl. No. Description Part Number Quantity
1 Pump I/F PCB M06587A001 1
2 Standoff, M/F 6-32 3/4” C08381 2
3 Washer, #6 External Tooth 068843 2
4 Screw, 6-32 X 3/8” Q12083-13 2
5 Cable Assy, Comm. TB C06678 1
6 Screw, 8-32 X 5/8” Q11270-55 2
7 Washer, #8 Spring Lock K73278-33 2
MDE-4864
Gasboy ® 9820 Pump Interface Kit
Installation Instructions
October 2009