GAI-Tronics LE200, LE200-FSR, LE200-FLR Page/Party Line Extenders - Manual (Page 35)

Pub. 42004-701L2F
M ODEL LE200 S ERIES W ALL -M OUNT P AGE /P ARTY
®
L INE E XTENDERS P AGE 33 of 50
f:\standard ioms - current release\42004 instr. manuals\42004-701l2f.doc
04/09
Series Connection of Page/Party ® System
Figure 12. Series Connection of Page/Party ® System
Table 38. Series Connection of Page/Party
®
System Table
Parameter Switch Configuration Description
T1 Line
Length SW2 Determined by installation distance between each pair of line extenders:
• A to B
• C to D
T1/E1 Clock
Source SW3-1
SW3-2
• Units A and C are the master clock sources: SW3-1 (open) SW3-2 (open)
• Unit B uses the T1/E1 clock from Unit A: SW3-1 (closed) SW3-2
(closed)
• Unit D uses the T1/E1 clock from Unit C: SW3-1 (closed) SW3-2
(closed)
LVDS Clock
Source SW3-3
SW3-4
LVDS clock is used between units B and C:
• Unit B - “in” disabled, “out” enabled: SW3-3 (open) SW3-4 (closed)
• Unit C - “in” enabled, “out” disabled: SW3-3 (closed) SW3-4 (open)
Mute Analog
Lines SW6-4 Unit C is muted since no Page/Party ® cable is connected:
SW6-4 (closed).