Formax FD 150 - Manual (Page 8)

Operating Manual
4 1/97
operator side The side of the FD 150 where
most of the controls are located.
input end The end of the FD 150 where the
document enters the FD 150.
output end The end of the FD 150 where the
document exits the FD 150.
1.6 Log Book
When used properly, the Log Book provides a written
record of the number of documents imprinted. Keep the
Log Book with the FD 150 whenever the machine is
operating. Before imprinting new documents, record the
number of imprints displayed on the non-resettable counter.
After imprinting, record the new number displayed on the
non-resettable counter.
1.7 Service
If any problems occur with the FD 150 or if you need
assistance installing or operating your FD 150, contact your
Formax dealer.