beautypg.com

Formax FD 150 User Manual

Page 36

background image

Operating Manual

32

1/97

6.6 Setting

Imprint Position
LEFT / RIGHT


Use the following instructions to move the imprint position
left and right on the document. (Refer to Figure 6.4.)

Figure 6.4 -- Setting Imprint Position Left / Right


1. Turn the POWER SWITCH OFF.
2. Turn the EXECUTIVE KEY to the UNLOCKED

position and open the COVER.

3. Locate the SADDLE HOLDER SCREW midway

between the two IMPRINT SADDLES. (Refer to
Figure 6.4.)

4. If you cannot see the SADDLE HOLDER, turn the

POWER SWITCH ON. Close the COVER and slowly
turn the EXECUTIVE KEY to the LOCKED position
indexing the SADDLE HOLDER.

5. Open the COVER.