beautypg.com

Formax FD 150 User Manual

Page 37

background image

Operating Manual

1/97

33

NOTE

When using ENDORSING SADDLES, remove the
saddle to find the SADDLE HOLDER SCREW.

6. Using the supplied allen wrench, loosen the SADDLE

HOLDER SCREW.

NOTE

Only loosen this screw 1-2 turns, or until the
SADDLE HOLDER will slide. The SADDLE
HOLDER SCREW must stay in the IMPRINT
SHAFT GROOVE.

7. Slide the SADDLE HOLDER to the desired position.
8. Tighten the SADDLE HOLDER SCREW.
9. Slide the INK ROLL CARRIAGE to align it with the

SADDLE HOLDER.

NOTE

Use care when handling the INK ROLL. The ink is
indelible and will not wash out of clothing.

10. Close the COVER.