Formax FD 150 - Manual (Page 48)

Operating Manual
44 1/97
trouble cause remedy
4. Misplaced
imprint.
Imprint position is not set
correctly. Select a different
MEMORY IMPRINT
POSITION or re-adjust
the imprint position.
Refer to Sections 6.4 &
6.6.
SADDLE HOLDER and
INK ROLL CARRIAGE are
not located correctly. Re-adjust imprint
position. Refer to
Section 6.6.
EXECUTIVE KEY was
turned too quickly to index
SADDLE HOLDER. Turn the EXECUTIVE
KEY to the UNLOCKED
position, then slowly turn
it to the LOCKED
position.
5. Partial ink on
document.
INK ROLL is not
positioned over the
IMPRINT SADDLE
correctly. Open the COVER and
align the INK ROLL
CARRIAGE directly
above the SADDLE
HOLDER.
6. Light imprint. IMPRINT SADDLES are
not being inked.
Turn the INK
ADJUSTMENT KNOB
clockwise to darken
imprint.
INK ROLL is out of ink. Install a new INK ROLL.
To order a new INK
ROLL, call your
Formax Dealer.
IMPRINT SADDLES are
worn. Install new IMPRINT
SADDLES. To order a
new pair, call your
Formax Dealer.