Formax FD 260 - Manual (Page 46)

42
10. SERVICE
10.1 Service
If any problems occur with this equipment or if you
need assistance installing or operating your FD 260
contact an authorized FORMAX dealer.
10.2 Repacking
Instructions
If it is necessary to ship your FD 260 to your
authorized Formax dealer for service, pack it in the
original shipping container and packaging material. If
the original container is not available, the FD 260
should be carefully packed so that it will not be
damaged in transit.
When calling for service, have your FD 260
’s serial
number handy.
NOTE
If the FD 260 is packed correctly, your Shipping
Carrier is liable for any damages that occur during
shipping.
Use the following instructions to pack the FD 260 with
commercially available materials.
1. Double wrap the machine in heavy plastic.
2. Use a heavy duty, double-walled container of 350-
pound test material.
3. Surround the FD 260 on ALL sides with at least 4
to 5 inches of shock absorbing packaging
material. This will provide firm cushioning and
prevent movement inside the container.
4. Seal the top and bottom of the shipping container
with strong tape or banding material.
5. Clearly and legibly mark the shipping container
FRAGILE.
6. Contact your authorized Formax Dealer.