Formax FD 260 - Manual (Page 24)

20
3. Insert one or both TAB ROLL ADAPTERS into the
core of the TAB ROLL. The TAB ROLL width may
allow only one TAB ROLL ADAPTER to fit in the
TAB ROLL.
4. Pull the SHELF down. Place the TAB ROLL
ADAPTER (rim away from you) with the TAB
ROLL attached on the TAB SPINDLE. (Refer to
Figure 6.2.)
NOTE
The tab strip must pull from the bottom of the TAB
ROLL toward the input end -- with the tabs on the
bottom of the tab strip -- facing the FEED TRAY.
Figure 6.2 - Threading Tabs