Formax FD 260 User Manual
Page 35

31
Trouble
Cause
Solution
14. Tab fold is off
mail piece.
Sweep position needs
adjustment.
Contact authorized
Formax dealer.
15. Leading edge of
mail piece tears
at the tab.
Sweep position needs
adjustment.
Mail pieces are poorly
folded.
Mail pieces are too
thin.
Contact authorized
Formax dealer.
16. Mail pieces jam
upon entering
FD 260.
Sweep position
requires adjustment.
Contact authorized
Formax dealer.
Sweep is reversed.
Slide plastic ruler
along feed tray to
reverse sweep.
17. Tab does not
fold, one tab is
folded on
multiple mail
pieces and/or
some mail pieces
are not tabbed.
Feeding device is too
fast.
Reduce speed of
feeding device until
tabs are being applied
correctly.
18. Difficulty
running
translucent tabs
Translucent tabs
typically run on the
Clear Tab setting
See Section 9.1.2 to
clear machine and
turn Sense Clear on.
19. Backing Paper
jam
With 1.5 inch tads poor
peel bar adjustment
The Peel Bar needs to
be straight. Top and
bottom edges must be
parallel. Check
carefully and correct
as necessary.