Formax FD 260 - Manual (Page 38)

34
9.1.3 Mail Piece
Jam
Mail pieces usually jam at the feed rolls or between
the belts and metal rolls at the end of the FEED
TRAY. Mail pieces can jam if the SWEEP is too high.
Mail pieces can be blocked if the SWEEP is not bent
on the FEED TRAY. If jamming is caused by the
SWEEP, contact an authorized Formax dealer for
service.
Figure 9.2 – Clearing Jammed Mail Pieces
To clear mail pieces from the feed rolls:
WARNING
DO NOT PLACE FINGERS OR TOOLS BETWEEN
OR NEAR MOVING PARTS.
1. Turn the POWER SWITCH off.
2. Pull the jammed mail pieces out in the direction
they feed through the FD 260.