Formax FD 260 - Manual (Page 45)

41
Tabs are made of different materials and will fold
differently with the same SWEEP position. For
example, paper tabs may fold differently than foil
tabs. Colored tabs may fold differently than white
tabs because ink adds moisture and density. Expect
some “tenting” with perforated tabs. Perforated tabs
tend to fold on the perf independent of PEEL PLATE
position.
The factory pre-set SWEEP position is standard and
works with most tabs. If your tabs fold too early or too
late, the SWEEP position must be adjusted. Do not
attempt this procedure. Contact an authorized
FORMAX dealer for service.
9.2.4 More Than
One Clear Tab On
Mail Piece
The FD 260 may place more than one clear tab on a
mail piece if the sensor is not tuned for clear tabs. To
correct this, tune the sensor for clear tabs. Refer to
Section 9.1.2.