Formax FD 260 - Manual (Page 29)

25
7. MAINTENANCE
7.1 General Cleaning
& Clearing
Your FD 260 will need regular cleaning. How often
you’ll need to clean the FD 260 depends on the
amount of paper dust your mail pieces generate.
Wipe surface dust or debris from the FD 260 with a
damp cloth as necessary.
7.1.1 Removing Tabs &
Debris From Peel Point
Area
Periodically check for peeled tabs stuck on or near
the bottom of the PEEL PLATE. You can see this
area by looking through the INSPECTION WINDOW
on the input end, below the threading path.
If you use clear tabs, you must remove any tabs stuck
in the entire PEEL PLATE area before activating
CLEAR TAB.
To remove tabs and debris from peel point area:
WARNING
DO NOT PLACE FINGERS OR TOOLS BETWEEN
OR NEAR MOVING PARTS.
1. Turn the POWER SWITCH off.
2. Reach through the INSPECTION WINDOW and
remove all tabs and debris.