Formax 7200 Series - Manual (Page 74)

73
Term Description
Optical Mark
Recognition
(OMR)
Optical Mark Recognition is intended for reading and interpreting
printed codes. These codes are one or more black marks which
are read from a document. These marks give information to the
inserting system about how to build-up and handle a set.
Output
Conveyor
Fitted at the output for filled envelopes to be ejected onto. Higher
capacity alternative to a receiving tray. 2 lengths are available.
Pod The feed hopper unit fitted to a Tower. A Tower is available with
either 1 or 2 pods, each one consisting of either 2 x 500-sheet
trays or 1 x 1000-sheet tray.
Reading error Condition in which the system could not reliably read or interpret
the OMR reading marks or barcode from a sheet.
Reading marks Marks added to documents containing finishing instructions that
can be identified by an reading head and interpreted according to
the used OMR code definition.
Receiving tray Fitted at the output for filled envelopes to be ejected into. Basic
alternative to an Output Conveyor.
Remote
diagnostics
The feature that makes it is possible to analyze a problem on an
inserting system from a remote location.
Service
engineer
Technical engineer whose task it is to resolve problems with
systems in the field. Besides dealing with problems, service
engineers are also responsible for preventive maintenance.
Single fold A single fold implies the document set is folded once. The fold
position is adjustable. This fold is illustrated below:
Stop counter Counter which sets the amount of envelopes to be filled. After
filling this amount of envelopes the system will stop.
Supervisor Person who is responsible for the technical state of the system.
Normally a supervisor has access to programming functions,
which are restricted for standard users.
Test run A test run is intended to validate the settings of the inserting
system:
Inspect and adjust the stop position of the envelope. •
Check the fold settings for one set. •
Check whether the address is correctly positioned behind the •
envelope window.
Tray (or
hopper)
Contains a stack of paper for a printer or inserter. This paper is
supplied to the system for further processing.
Vertical
transport
The vertical transport section between hoppers and folder/
collator below .