Formax 7200 Series - Manual (Page 53)

52
Picture is viewed looking
inside the collation area
away from the envelope
hopper.
Clean all sensors arrowed.
Lower the collate clamshell
and open the upper
conveyor (furthest from
the envelope hopper) so
that it locks in place.
Picture is viewed looking
inside the collation area
away from the envelope
hopper.
Insert the airduster nozzle
deep into the hole and
spray liberally. Note the
the upper sensor half is
not easy to see and is
mounted on a bar.
Lower the conveyor.
Lower the side cover and
raise the overguide inside
the closer cavity, latching
it in place.
Clean the sensors
arrowed.