Loading the paper hoppers – Formax 7200 Series User Manual

Page 42

background image

41

8 Loading the paper hoppers

8.1 Loading the envelope hopper

Using the black knob,

adjust the side guide to

give 1-1.5mm clearance

each side of the

envelope.

Adjust the angle of the

backrest (see below) and

load the envelopes into

the hopper, flaps forward

so that the lower edges

follow the contour of the

surface and down into

the pick-up roller. Move

the backrest forward

(see below) so the the

envelopes are fully

forward, but not tightly

packed.

Move the backrest forward by squeezing

the roller bar upwards to release the

rollers from the track.

Adjust the angle by slackening the knob

each side.

C4: Fully raised

DL/DL+: Fully lowered

Note:

If the envelopes feed erratically, try a

backrest angle in-between.