Formax 7200 Series User Manual

Page 60

9.3 Changing the feed tires

Certain documents (eg. glossy materials) may not not feed properly with the

standard feed rollers. Sets of optional feed tires are available to assist feeding.

These can be fitted as follows.

Remove the 3 knobs

indicated and open the

side guides to their widest

extent.
Lift the feed bed out of the

chassis to access the feed

shafts beneath.

Slide the spring-loaded

collars inboard and lift the

feed shafts out of their

bearing hubs. The feed

tires can be pried off the

rollers and replaced with

alternative items.
When replacing the shafts,

ensure that the drive pins

are properly located in the

hubs.