Formax 7200 Series - Manual (Page 10)

9
3.2 Identification of parts
The main parts of the machine are shown below.
1 2 3 4 5
8
7
6
1 Envelope feeder
Holds up to 800 envelopes (DL). Fiited with a sensing conveyor that operates
on demand to move the envelope stack forward.
2 Touch-screen monitor
Runs the IMOS operating software and responds to button pushes. A key-
board and mouse are also included.
3 Collation and insertion area
Folded forms, either singly or in groups, are collated here into one pack,
along with enclosures. The pack in then inserted into the envelope.
Note: Items 1, 2, 3 & 8 are all part of the Insertion Head Unit.
4 Versatile Feeder
These are track mounted units, with an end-station variant also available. Up
to 8 may fitted (7 if a flex tower unit is fitted - see below).
The Versatile Feeder feeds enclosures such as inserts, flyers, BREs etc. The
hopper holds up to 1000 80gsm inserts. A mark reading variant for OMR/
Barcode/2D is also available.
5 Flex Tower
This is a folder unit and is only available as an end module. It can be fitted
to the insertion head on its own, or in conjunction with Versatile Feeders. It
is fitted with various options of feed trays and an accumulator (see following
page).