Formax 7200 Series User Manual

Page 16

4.2.3 To adjust the Document Unit settings

Unit Fine Tuning

The fine tuning options available will depend upon whether a

Versatile Feeder or Flex Folder is fitted.

Select the document or insert icon on the machine graphic in the Run

screen to display the fine tuning screen.

Hopper Fine Tuning

From here you can adjust

hopper settings. You can

select:
a: Feed Always or not. If you

select Off, the unit is disused

until it is turned back on

again.
b: Whether doubles detection

is turned on or off. Turn off if

booklets or very thick inserts

are being fed. Note: refers only to optical detection - mechanical detection may also be fit-

ted.
c: Only for Reading units. Retrieve CIS Image - if selected, images of the label as seen

by the CIS reader will be displayed. The images will be of the final 2 documents in the group

and can be useful for error checking by confirming that the whole label was read, for exam-
ple, or comparing the 2 images.

Important: All fine adjustments apply only to the current job

and will not affect any other jobs