Formax 7200 Series - Manual (Page 62)

61
10 Technical Specification
10.1 Inserter head
Pack thickness Maximum pack thickness is defined as the internal
dimension of a rigid opening that a filled envelope will fall
through under its own weight.
#10 & DL Envelopes: up to 6mm (¼”)
C5/C4 Envelopes and above: up to 6mm (¼”)
Pack clearance The minimum clearances required between the inserts and
envelopes are dependent on insert pack thickness.
Clearance is the total clearance and is defined as the
difference between the largest overall dimensions of the
pack and the internal dimensions of the envelope (see
below). The required clearances are summarised as
follows:
Pack <3mm: Depth 6mm (¼”) Width 16mm (5/8”)
Pack >3mm <6mm: Depth 12mm (½”) Width 19mm (¾”)
Width Clearance
Envelope
Insert
Depth Clearance
Cycling speed Up to 4800 envelopes per hour (based on 1 x A4 folded
sheet into a C5/C65 or DL or #10 (114mm x 229mm)
envelope).
Up to 3900 envelopes per hour (based on 1 x A4 folded
sheet with 1 x enclosure into a C5/C6 or DL or #10
(114mm x 229mm) envelope).
Speeds for other conditions available on request.