Formax 7200 Series User Manual

Page 33

If you wish to

make adjustments to the

collation mode or Max no.

of sheets folded together,

press the Edit advanced

settings button.

Choose whether to

collate leading edges of

documents as they feed

through the folder, then

folded together without

entering the accumula-

tor, or to feed separately

into the accumulator be-

fore folding. Sheets are

fed singly by default, so

each sheet is folded and

inserted separately. Set

max number for folding

together. Groups bigger

than this will be split into

a) max number, followed

by b) remainder.

The maximum that can be fed into the accumulator defaults to 9, but can be up to

25. Note: This will depend upon the paper type.
Multi-envelope mode allows two separate jobs to be run in succession using the

same document set. If set to ‘Split Oversize’, this splits, folds and inserts as for

‘Max Fold’ described above. If set to ‘Divert Oversize’, all groups numbering greater

than the number set in ‘Divert/Split Threshold’ will be diverted to the divert tray,

and if set to ‘Divert Undersize’, the same will apply for groups below the threshold.
The machine is then stopped, the job is changed and the forms in the divert tray

are put back into the document set, and the new job is run.
‘Divert Action’ allows the option of the machine stopping automatically upon divert,

or to continue, allowing the operator to intervene.
When you have finished, fold settings are now complete and the screen will show

that this is ticked. You will now define the output settings.