Formax 7200 Series User Manual

Page 43

8.2 Loading the versatile feeder hopper

1. Slacken the black knob

next to the side guides

(arrowed) and move the

guides to give 1-1.5mm

clearance each side of

the enclosure. Tighten

the knob.

2. Slacken the black

knob under the backrest

(arrowed) and move it

forwards to support the

enclosures as shown.

Ensure the enclosures are

directed down into the

feed rollers. Tighten the

knob.

Adjusting the separator

The separator prevents more than one enclosure being fed at a time.

To adjust the separator, turn the knob on

the back of the feed hopper.

Clockwise decreases the gap,

anti-clockwise increases it.

To set the separator gap, empty the

hopper, then slide an enclosure into the

gap and turn the knob until the separator

will just grip the enclosure as you

withdraw it.

To help you establish an initial setting,

there is a setting gauge on the separator

unit, visible after opening the feeder side

cover. See following page.