Formax 7200 Series - Manual (Page 40)

39
4
Select the address
position. This defaults to
‘Top’; specify middle, bot-
tom or none if required.
Specify whether the docu-
ment is to be folded (eg. a
booklet iwould not be) and
its thickness and weight.
Note this is the actual
weight of the document,
not the paper weight.
The thickness is more ap-
plicable to booklets - if no
figure is specified, 80gsm
paper will be assumed.
If the document uses an OMR or barcode label, select a reading definition. Note:
this is obtained under licence as an option and must already exist on the
machine.
If the document does not use an OMR or barcode label, press the Save button, oth-
erwise, proceed as follows.
5
Press the Region of Interest button to specify the position of the label.
6
Specify the posi-
tion of the label and press
the Save button when
done.
The document is now fully defined and is available for use.