Formax 6402 Series - Manual (Page 70)

68
AutoSet
The feature of an Inserting System to automatically determine its Job
settings by measuring the sizes of documents and envelope. From all
Feeders that are loaded one sheet will be taken. Based on the
maximum document length (which is also the length of the document-
set) and the length of the envelope the fold type is determined.
AutoSet job A job that is created with the AutoSet functionality.
Prod. Feeder Feeder with high capacity feed tray (e.g. 2000 sheets A4 80gr).
Multifeed
The feature of an Inserting System in which more than one sheet is
taken from a Feeder.
OMR Optical Mark Recognition
OMR code
definition Standard 1-track OMR code definition. Specifies the amount of reading
marks used and the functionality linked to each of them (how each
should be interpreted).
Operator The person operating an Inserting System.
Optical Mark
Recognition
(OMR) Optical Mark Recognition is intended for reading and interpreting
printed codes. These codes are one or more black marks which are
read from a document. These marks give information to the Inserting
system about how to build-up and handle a set.
PowerFold
®
The powerFold
®
can fold up tot 10 pages.
Reading error Condition in which the system could not reliably read or interpret the
OMR reading marks from a sheet.
Reading marks Marks added to documents containing finishing instructions that can
be identified by an OMR head and interpreted according to the used
OMR code definition.
Remote
diagnostics The feature that makes it is possible to analyze a problem on an
Inserting System from a remote location.
Service engineer Technical engineer whose task it is to resolve problems with systems
in the field. Besides dealing with problems, service engineers are also
responsible for preventive maintenance.
Single fold A single fold implies the document/set is folded once. The fold-position
is adjustable. This fold is illustrated in the picture below:
Stacker Used as storage for filled envelopes.
Stop counter Counter which sets the amount of envelopes to be filled. After filling
this amount of envelopes the system will stop (even during a clear).
Supervisor Person who is responsible for the technical state of the machine.
Normally a supervisor has access to programming functions, which are
restricted for standard users.
Term Description