Formax 6402 Series - Manual (Page 53)

51
ENGLISH
• Volume of modem: set the modem volume.
a Press or to change the volume of the speaker.
Do not set the volume to zero as the sound of the modem is helpful during
remote assistance.
b Press to confirm modified settings.
4.4 Production Feeder
4.4.1 Function
The Production Feeder can be loaded with a high number of documents. This feeder
is intended to be used for Business Reply Envelopes (BRE), but also ‘standard’
documents up to 356 mm (14") length can be processed with it.
4.4.2 Preparations
The Production Feeder should be installed at
the position of feeder no. 1.
It can be placed into position in the same way as the
other document feeders are fitted.
Proceed as follows:
1. Lift the paper feed rollers with the front edge of
the Production Feeder.
2. Move the Production Feeder forward until it
hooks behind the frame axle.
3. Connect the connector A to the socket B.
The Production Feeder is auto-detected by the system when it is switched on. This makes
it easy to switch over from the standard document feed tray to the Production Feeder
and vice versa.
Note
To allow easier hooking on of the Production Feeder it is advised to put the feeding plate
in the
rear position (see 4.4.4 ”Document Separation” on page 52).
To make use of a Production Feeder it is not necessary to (re-)program the jobs.
A B