Formax 6402 Series - Manual (Page 17)

15
ENGLISH
After entering the correct pin code the “supervisor
menu” appears.
This menu enables checking and configuring the
system.
The “supervisor menu” shows the following
functions:
• : shows system information,
like:
-
The flex certificate, used for OMR
- The counter since last visit: the counter value since the last service visit
- The last error generated by the system
The screen shows a button : this shows the software versions that are
present in the total system.
• : shows option information and system information:
- The chip ID
- The system ID
- The installed options
For installing new options, see 4.1 ”Activate an Option” on page 42.
• : opens the “job settings” supervisor menu (see ”Job Settings
(Supervisor)” on page 16). From this menu system parameters can be set.
• : opens the “test menu” (see ”Test” on page 18). Use this menu to
test the system.
• : opens the “Online Services” menu (option, see 4.3 ”Online Services”
on page 48). This screen enables to connect the system to a server and receive
messages.