Formax 6402 Series - Manual (Page 39)

37
ENGLISH
• Max. sheets: select the maximum amount of sheets in the set of documents using the
arrow buttons.
Note
The maximum number of sheets in a set is 25. When the number of sheets exceeds 8 or
10, depending on the fold, the document can not be folded anymore. In this case, the
maximum length of sheets is 156 mm (6.1 inch) for a C5 envelope. Also make sure that
the fold is set to No fold.
Ignoring this will certainly lead to stoppages.
When the maximum number of sheets exceeds the programmed maximum number of
sheets in a set, the machine stops and error VS:110 will be displayed. After removing the
set and pressing the button, the machine will start and repeat the process until an
insert or divert mark is encountered, error VS:135 (final set part) will be displayed.
By pressing the button the next “OMR settings”
menu appears. This menu covers the following
setting:
• Stop on misread: press to set if the
machine should stop or not on misreading an
optical mark.
When “stop on misread” is set to “yes”, the machine
stops after detecting an OMR misreading. The
incorrect set is diverted. After resetting the machine,
the final part of the set is also diverted and the system starts processing again. The
diverted set(s) should be checked by the operator.
When “stop on misread” is set to “no” the machine does not stop after detecting an OMR
misreading. The incorrect set is diverted. The final part of the set is also diverted and then
the machine starts processing again. After detecting 5 OMR misreadings in a row, the
system stops and an error code is generated.
3.9.6 Double Feed Control Settings
This screen enables to set the Double Feed Control
(DFC) settings for the different feeders on or off and
to set the thickness measurement.
To set the DFC for the different feeders:
1. Press the button to select a feeder.
2. Press the button to switch the DFC on -
or off - .