Formax 6402 Series - Manual (Page 37)

35
ENGLISH
• In the second fold setting screen you can select
the fold type.
The following choices are available:
Except when no fold is required, the display shows a simple diagram of the document with
the fold positions. To change the fold positions press next to a fold. Enter the
required position of the relevant fold.
The next table shows possible fold positions:
Note
The display will indicate when entered positions are out of range.
No fold (no settings required)
Single fold
Letter fold
Double parallel fold
Zig-zag fold
Fold type Minimum position Maximum position
Single fold 75 mm (2.95")
25 mm (0.98") (extended
powerFold
®
)
Longest document length
minus 25 mm (0.98")
Letter fold First fold 75 mm (2.95")
25 mm (0.98") (extended
powerFold
® )
Longest document length
minus 50 mm (1.97")
Second fold Position first fold plus
25 mm (0.98") Longest document length
minus 25 mm (0.98")
Zig-zag fold First fold 75 mm (2.95")
25 mm (0.98") (extended
powerFold
®
)
Longest document length
minus 100 mm (3.94")
Second fold Position first fold plus
25 mm (0.98") Longest document length
minus 75 mm (2.95")
Double parallel
fold First fold 75 mm (2.95")
25 mm (0.98") (extended
powerFold
® )
Longest document length
minus 50 mm (1.97")
Second fold Position first fold plus
25 mm (0.98") Longest document length
minus 25 mm (0.98")